International standards and regulatory framework
This page is in English because standard titles and references are in English.
This page maps Voltesta's EV curriculum to the international and Indian standards and regulations that govern electric vehicles, batteries and charging. It explains who publishes each one, what it covers, which vehicles it applies to, and where our courses and labs teach it.
Applicability. These standards are not all applicable to every vehicle category. Their applicability depends on vehicle type, market, voltage architecture and intended use. A 48 V scooter sold in India, a 400 V car exported to Europe and a public DC fast charger each follow a different set.
1. How the framework is layered
Regulations
Legal requirements a vehicle must meet before it can be sold and registered. In India these are the Central Motor Vehicles Rules (CMVR), administered by the Ministry of Road Transport and Highways (MoRTH), with technical requirements in Automotive Industry Standards (AIS) and type approval by test agencies such as ARAI and ICAT. Markets that apply the UNECE 1958 Agreement use UN Regulations for type approval.
Examples: AIS-156, AIS-038 (Rev 2), UN R100, UN R10, UN R136
Standards
Technical documents agreed by experts that define tests, interfaces and safety levels. They are voluntary unless a regulation, a tender or a customer contract makes them mandatory. Many Indian Standards are harmonised with, or adopted from, ISO and IEC standards.
Examples: ISO 6469, ISO 26262, IEC 62660, IEC 61851, IEC 62196, SAE J-series, IEEE, IS 17855, IS 17017
Industry process frameworks
How companies develop, build and prove quality, demanded by vehicle makers from their suppliers. They describe processes and evidence rather than a product test.
Examples: Automotive SPICE, APQP, PPAP, FMEA, IATF 16949
2. Organisations and their standards
| Organisation | Important area | Standards / framework |
|---|---|---|
| ISOInternational Organization for Standardization | EV design and safety | ISO 6469, ISO 26262, ISO 15118, ISO/SAE 21434, ISO 21448 |
| IECInternational Electrotechnical Commission | Batteries and electrical systems | IEC 62660, IEC 61851, IEC 62196 |
| SAE InternationalSociety of Automotive Engineers | Automotive engineering | SAE J-series (for example J1772, J2464, J2929, J1939) |
| UNECEUnited Nations Economic Commission for Europe (WP.29) | Vehicle regulations and homologation | UN R100, UN R10, UN R136, UN R155, UN R156 |
| IEEEInstitute of Electrical and Electronics Engineers | Electrical systems and grid integration | IEEE 1547, IEEE 2030.5, IEEE 2030.1.1 |
| BISBureau of Indian Standards | Indian EV standards | IS 17855, IS 17191, IS 17017, IS 16893, IS 18590, IS 18606 and related IS |
| MoRTH / ARAIMinistry of Road Transport and Highways; Automotive Research Association of India | Indian vehicle regulations and type approval | AIS-156, AIS-038 (Rev 2) |
| Automotive SPICEVDA Quality Management Center (VDA QMC) | Automotive software development | ASPICE process assessment model |
| AIAGAutomotive Industry Action Group (with IATF for IATF 16949) | Automotive quality | APQP, PPAP, FMEA, IATF 16949 |
3. Standards by area
Each area lists the standard or regulation, what kind of document it is, and what it covers in plain words.
3.1 Vehicle electrical safety and type approval
How the high-voltage system, the battery and the people around the vehicle are kept safe, and what a vehicle must pass before sale.
| Reference | Type | What it covers |
|---|---|---|
| ISO 6469-1 | Standard | Rechargeable energy storage system (RESS) safety. Safety requirements for the traction battery installed in the vehicle, including protection against hazards from the battery itself. |
| ISO 6469-2 | Standard | Vehicle operational safety. Safe operation of the electric drive, such as the power-on procedure, driving-direction control and protection against unintended movement. |
| ISO 6469-3 | Standard | Electrical safety. Protection of people against electric shock. Defines voltage class A (up to 60 V DC / 30 V AC) and class B (above that, up to 1500 V DC / 1000 V AC), isolation and protective measures. |
| ISO 6469-4 | Standard | Post-crash electrical safety. Keeping the vehicle electrically safe for occupants and rescuers after a crash. |
| UN R100 | Regulation | Electric power train safety (M and N categories). UNECE type-approval regulation covering the electrical safety of the power train and the safety of the REESS (battery) in cars, buses and goods vehicles. |
| UN R136 | Regulation | Electric power train safety (L category). The equivalent UNECE regulation for electric two-wheelers, three-wheelers and quadricycles. |
| AIS-156 | Regulation | Electric power train and battery safety for L-category vehicles (India). CMVR requirement for electric two- and three-wheelers and quadricycles. Its 2022 amendments added requirements on cells, BMS, on-board charger, pack design and thermal propagation, applied in two phases from December 2022 and March 2023. |
| AIS-038 (Rev 2) | Regulation | Electric power train safety for M and N categories (India). CMVR requirement for electric cars, buses and goods vehicles, treating the battery and vehicle together as one system. Amended in 2022 alongside AIS-156. |
| IS 18590 and IS 18606 | Standard | Indian Standards for EV power train and battery safety (2024). IS 18590:2024 covers L-category vehicles and IS 18606:2024 covers M and N categories. |
| IS 18294 | Standard | E-rickshaw and e-cart safety (2023). Indian Standard setting safety requirements for e-rickshaws and e-carts. |
Related reading: Insulation monitoring and high-voltage safety basics; Thermal runaway: what causes it and how packs prevent it; Precharge circuits: why you can't just close the contactor
3.2 Batteries and cells
How lithium-ion cells and traction packs are tested for performance, reliability, abuse and transport.
| Reference | Type | What it covers |
|---|---|---|
| IEC 62660 | Standard | Secondary lithium-ion cells for the propulsion of electric road vehicles. Part 1 performance testing, Part 2 reliability and abuse testing, Part 3 safety requirements, all at cell level. |
| IS 16893 | Standard | Lithium-ion cells for electric road vehicles (India). Indian Standard for traction lithium-ion cells, covering performance and reliability tests. |
| IS 17855 | Standard | Lithium-ion traction battery packs and systems — performance testing (2022). Indian Standard harmonised with ISO 12405-4. Tests performance, reliability and electrical function of packs under real conditions such as long parking, storage during shipping and low or high temperature. |
| SAE J2464 | Standard | Safety and abuse testing of EV and hybrid batteries. Abuse tests (mechanical, thermal, electrical) used to understand how a battery responds to misuse. |
| SAE J2929 | Standard | Propulsion battery system safety. Safety performance criteria for EV and hybrid propulsion battery systems. |
| UN 38.3 | Regulation | Transport testing of lithium cells and batteries. Tests that lithium cells and batteries must pass before they can be shipped. |
Related reading: Lithium-ion cell types: NMC, LFP and what the numbers mean; Battery cycle life: what shortens it and how to extend it; What a BMS does, in plain words
3.3 Charging, connectors and charger communication
How energy gets from the grid into the vehicle safely, through which plugs, and how the car and charger talk to each other.
| Reference | Type | What it covers |
|---|---|---|
| IEC 61851 | Standard | Electric vehicle conductive charging system. General requirements for charging equipment (Part 1), with further parts for EMC, DC chargers (Part 23) and DC charging communication (Part 24). |
| IEC 62196 | Standard | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Part 1 general requirements, Part 2 AC connectors (Type 1, Type 2), Part 3 DC and combined AC/DC connectors (including CCS). |
| ISO 15118 | Standard | Vehicle-to-grid communication interface. Digital communication between the EV and the charger, including Plug and Charge, and in ISO 15118-20 bidirectional power transfer. |
| IS 17017 | Standard | Electric vehicle conductive charging system (India). Indian series aligned with IEC 61851 and IEC 62196, plus Indian parts such as AC charge points for light electric vehicles (Part 22/Sec 1) and DC supply equipment where protection relies on electrical separation (Parts 25 and 31). |
| SAE J1772 | Standard | Conductive charge coupler (North America). The AC connector and charging control signals widely used in North America; its combined version is CCS1. |
| IS 17896 | Standard | Electric vehicle battery swap system. Indian Standard adopted from IEC 62840, covering general guidance and safety requirements for battery swap stations. |
Related reading: Charging connectors in India: Type 2, CCS2 and GB/T; AC vs DC charging: the real difference; How public fast chargers work
3.4 Electromagnetic compatibility (EMC)
Making sure the vehicle and its charger neither disturb other electronics nor get disturbed by them.
| Reference | Type | What it covers |
|---|---|---|
| UN R10 | Regulation | Electromagnetic compatibility of vehicles. UNECE type-approval regulation on EMC for vehicles and electronic sub-assemblies, including conditions while charging. |
| IEC 61851-21 / IS 17017 (Part 21) | Standard | EMC requirements for conductive charging. EMC requirements for on-board and off-board charging equipment. |
3.5 Energy consumption, range and power (India)
How the energy use, range and motor power printed on a brochure are measured.
| Reference | Type | What it covers |
|---|---|---|
| IS 17191 | Standard | Electric power train vehicles. Part 1 measurement of electrical energy consumption, Part 2 method of measuring range, Part 3 measurement of net power and maximum 30-minute power. |
Related reading: Real range vs claimed range: why they differ; How to read an EV spec sheet without getting fooled
3.6 Functional safety, safety of the intended functionality, cybersecurity and software
How the electronics and software that control the battery, motor and brakes are engineered so that faults, limitations and attacks do not cause harm.
| Reference | Type | What it covers |
|---|---|---|
| ISO 26262 | Standard | Functional safety of road vehicles. Safety lifecycle for electrical and electronic systems. Hazards are rated with Automotive Safety Integrity Levels (ASIL A to D) that set how rigorously a function such as BMS over-voltage protection must be developed and verified. |
| ISO 21448 | Standard | Safety of the intended functionality (SOTIF). Hazards that come from performance limits or misuse even when nothing has failed, for example a sensor that misreads a situation. Most relevant to driver assistance and automated driving. |
| ISO/SAE 21434 | Standard | Road vehicles — cybersecurity engineering. Cybersecurity risk management across the life of the vehicle, from concept to decommissioning, including connected BMS and chargers. |
| UN R155 and UN R156 | Regulation | Cybersecurity and software update management. UNECE regulations requiring a certified cybersecurity management system (R155) and software update management system (R156) for vehicle type approval in markets that apply them. |
| Automotive SPICE (ASPICE) | Framework | Process assessment model for automotive software and systems. Published by VDA QMC. Assesses supplier development processes (requirements, architecture, coding, testing) on capability levels 0 to 5. |
3.7 In-vehicle communication
How the BMS, controller, charger and dashboard exchange data.
| Reference | Type | What it covers |
|---|---|---|
| ISO 11898 | Standard | Controller area network (CAN). The CAN bus physical and data link layers used by most EV controllers and battery management systems. |
| SAE J1939 | Standard | Vehicle network for commercial vehicles. CAN-based messaging used mainly in trucks, buses and off-road vehicles. |
Related reading: CAN bus in an EV: how the parts talk to each other; The VCU: the brain of the vehicle
3.8 Grid integration
How chargers and vehicles connect to the electricity network, and how they may send power back.
| Reference | Type | What it covers |
|---|---|---|
| IEEE 1547 | Standard | Interconnection of distributed energy resources. Requirements for equipment that connects to the grid and can export power, relevant to vehicle-to-grid. |
| IEEE 2030.5 | Standard | Smart energy profile application protocol. Communication protocol for managing distributed energy resources, including EV chargers. |
| IEEE 2030.1.1 | Standard | DC quick and bidirectional chargers. Technical specification for DC quick chargers, including bidirectional operation. |
Related reading: Understanding your electricity bill for EV charging
3.9 Automotive quality
How manufacturers and suppliers plan, prove and maintain quality in production, including battery assembly.
| Reference | Type | What it covers |
|---|---|---|
| APQP | Framework | Advanced product quality planning. AIAG framework that plans a new product from concept to production in defined phases. |
| PPAP | Framework | Production part approval process. AIAG process by which a supplier proves to the vehicle maker that production parts consistently meet requirements. |
| FMEA | Framework | Failure mode and effects analysis. Structured method to find and reduce risks in design and process, described in the AIAG and VDA FMEA Handbook. |
| IATF 16949 | Framework | Automotive quality management system. Quality management system standard for automotive production and service parts, issued by the International Automotive Task Force (IATF), of which AIAG is a member. Certification is audited by third parties. |
Related reading: Setting up a battery assembly unit: the basics
4. Which standards apply to which vehicle
A typical starting point by vehicle category. The exact list for a product depends on its market, voltage, use and the latest notifications, so always confirm with a test agency or the official text.
| Category | What it includes | India | International references |
|---|---|---|---|
| L category | Two-wheelers, three-wheelers and quadricycles (vehicles with fewer than four wheels, plus quadricycles) | AIS-156; IS 18590; IS 17855 and IS 16893 for batteries; IS 17017 for charging | UN R136; ISO 6469; IEC 62660 |
| E-rickshaw and e-cart | Low-speed passenger and goods three-wheelers | IS 18294; battery and charging standards as for L category | Depends on market |
| M category | Vehicles with at least four wheels carrying passengers (cars, buses) | AIS-038 (Rev 2); IS 18606; IS 17191 for energy and range; IS 17017 for charging | UN R100; UN R10; ISO 6469; ISO 26262; ISO 15118; UN R155/R156 where applied |
| N category | Vehicles with at least four wheels carrying goods | AIS-038 (Rev 2); IS 18606; IS 17191 for energy and range | UN R100; UN R10; SAE J1939 networks on many trucks |
| Chargers and swap stations | AC and DC charging equipment, connectors, battery swapping | IS 17017 series; IS 17896 | IEC 61851; IEC 62196; ISO 15118; SAE J1772; IEEE 2030.1.1; IEEE 1547 for grid export |
| Cells, packs and electronics suppliers | Companies making cells, packs, BMS, controllers and software | IS 16893; IS 17855; AIS requirements passed down by the vehicle maker | IEC 62660; SAE J2464; SAE J2929; UN 38.3; ISO 26262; ISO/SAE 21434; ASPICE; IATF 16949, APQP, PPAP, FMEA |
Voltage architecture. ISO 6469-3 treats up to 60 V DC as voltage class A. A "60 V" lithium pack is only its nominal voltage; fully charged it rises above 60 V, so in our courses we treat 60 V packs, and anything larger, with high-voltage safety precautions.
5. Curriculum map
Where each area is taught. Practised means learners do hands-on work or a lab aligned with it. Introduced means it is named and explained. Our courses build awareness and safe practice; they do not certify products or people against these standards.
| Area | EV basics (free) | EV technician | Battery technology | Mechanic and workshop | Practice labs | How it is covered |
|---|---|---|---|---|---|---|
| Vehicle electrical safety and type approval | Introduced | Practised | Introduced | Practised | Practised | Safe charging habits; working on 48 V and 60 V vehicles; isolation and pre-checks before opening a pack; AIS-156 named in the pack assembly and fault-finding labs. |
| Batteries and cells | — | Introduced | Practised | Introduced | Practised | Cell types, grading, series and parallel sizing, BMS limits, warning signs, storage and transport; pack assembly and lead-acid-to-lithium labs. |
| Charging, connectors and charger communication | Introduced | — | Introduced | Practised | Introduced | AC and DC charging, connectors used in India, home charging safety, charger checks in the workshop; fast charging in the four-wheeler range lab. |
| Energy consumption, range and power (India) | Introduced | — | Introduced | — | Practised | Reading kWh, energy per km and claimed range; working out real range in the four-wheeler range lab. |
| In-vehicle communication | — | Introduced | — | — | — | Reading controller fault codes; the CAN bus article explains how the parts talk to each other. |
| Electromagnetic compatibility (EMC) | — | — | — | — | — | Reference for engineers; not part of the current technician courses. |
| Functional safety, safety of the intended functionality, cybersecurity and software | — | — | — | — | — | Reference for engineers; not part of the current technician courses. |
| Grid integration | — | — | — | — | — | Reference for engineers; not part of the current technician courses. |
| Automotive quality | — | — | — | — | — | Reference for battery assembly units and suppliers; not part of the current technician courses. |
6. Using this page
- This is an educational summary in our own words, not the text of any standard and not legal advice.
- Standards and regulations are revised and amended. Check the current edition and any amendments before you rely on one.
- Official texts are sold by their publishers: ISO, IEC, SAE International, IEEE, BIS, VDA QMC and AIAG. AIS documents and CMVR notifications are published by MoRTH and ARAI.
- For type approval or certification of a product, work with an accredited test agency such as ARAI or ICAT.
Last reviewed: November 2026.
Talk to Voltesta
Message us on WhatsApp in your own words. A message is ready for you to edit, and we reply within one working day.