Voltesta

Inside a BMS: the parts and what each does

, 1 min read

A BMS looks like a plain circuit board, but it is the guard of the whole pack. Each part has a clear job.

Sensing and the controller

Voltage taps read every series group of cells; thermistors read temperature at a few points; a shunt or hall sensor reads current. A small microcontroller takes all of this and decides what the pack is allowed to do.

Switching and balancing

Power MOSFETs (or a contactor on big packs) connect or cut the pack from the outside world. Balancing resistors bleed the fullest cells during charge so the cells stay equal.

The protections a BMS enforces are over- and under-voltage per cell, over-current in charge and discharge, short circuit, and over- and under-temperature. Many BMS also report SOC and SOH over a serial or CAN link.

A healthy BMS is invisible: it only makes itself known when it cuts power to keep the pack safe.

Talk to Voltesta

Message us on WhatsApp in your own words. A message is ready for you to edit, and we reply within one working day.